COMe Ref.Carrier T6

COM Express® Reference Carrier Type 6
This product is not recommended for new designs.
Specifications
  • COM Express® Rev. 2.0, Pin-out Type 6
  • mini-ITX Form Factor (170mm x 170mm)
  • DVI-I, DisplayPort, HDMI, LVDS
  • SIM card support, Smart Battery, USB 3.0
Download Datasheet

Reference Carrier Board for COM Express® Pin-out Type 6 Computer-on-Modules

Kontron's Reference Carier Bord in mini-ITX form factor for future-oriented COMs with Pin-out Type 6. A small reference design for small and portable solutions with SIM card support for mobile communication, USB 3.0 and all Digitial Display Interfaces (DisplayPort, LVDS, DVI, HDMI).

Features

Compliance COM Express® Rev. 2.0

Pin-out Type 6
Dimensions (H x W x D) 170 x 170 mm (mini-ITX)
Supported Modules COM Express® basic or compact with pin-out Type 6
Graphics 1x LVDS/JILI FFC 40 connector

1x DVI-I (VGA, DDI1)

1x DP++ (DDI2)

1x HDMI (DDI3)
Hard Disk 3x SATA

1x eSATA
USB 2x USB 3.0

4x USB 2.0
PCI Express / PCI support 1x PCI Express x4

1x miniPCIe (with USB and SIM card)

1x Express Card (with USB)
Audio Realtek ALC886 HD-Audio

S/PDIF in/out, Toslink

5.1 Audio jacks

Front Panel Audio connector
Ethernet 1x 10/100/1000 MBit RJ 45 connector
Serial 2x UART on pin-header (from module)
Special Features SIM Card

1x PWM Fan

SPI boot
Common Features Feature Connector

Port80 POST Code Display

Diagnostic LED

PWR/RST Buttons
Options Carrier EEPROM

Compatibility to Type 10 modules
Power Supply ATX power supply 20+8pin

8.5 - 20V Single Supply support

2x 10.8V Smart Battery support
Temperature Operation: 0° to 60°C

Storage: -30° to 85°C
Humidity 93% relative Humidity at 40°C, non-condensing

(according to IEC 60068-2-78)

Downloads

Datasheets

Manuals

General Safety Instruction
[ general-safety-instructions-jumptec.pdf, 564.95 KB, Sep.15.2025 ]

More Downloads

All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section

Accessories

COMe Mount KIT 8mm 1set
38017-0000-00-0
COM Express® Mounting Kit 8mm 1set for threaded HSP and Cooling Solutions  
COMe Mount Kit 8mm 100sets
38017-0100-00-0
COM Express® Mounting Kit 8mm 100sets  
ADA-LVDS-DVI 18Bit
9-5000-0352
18bit LVDS (JILI) to DVI-D, including the flatfoil cable  
ADA-LVDS-DVI 24Bit
9-5000-0353
24bit LVDS (JILI) to DVI-D, including the flatfoil cable  


back

Info Request

Comparisons (up to 5 products)

There are currently no products in your Comparison.

Services

Take advantage of our full-service approach

To find out more about our services go to services pages

Customer Section

This section is exclusively for Kontron Customers. After registering you will gain access to BIOS images, product change notifications (PCNs), 3D models for CAD, and software development tools.

Click below to login or register.
Login or
register here

*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the customer section is granted.